Born from the need to satisfy the requirements of the fastest and most powerful cyclists, Lampo, available in both Direct Mount and Disc brakes versions, is the custom carbon frame by Sarto Srl, which better combines aerodynamic features with stiffness into a unique bicycle.
Through careful CFD (Computational Fluid Dynamic) analysis, every profile of the tube set that forms our Lampo has been optimized from the aerodynamic point of view. This brand new Lampo uses “Triple Edge” technology on its down tube, fork and top tube, consisting of special tube shaping. “Triple edge” technology allows to control the airflow around the stripes and delays the detachment of the outer layer from the surface of the tube so that the air can flow with less resistance. This effect is very similar to that of the dimples on a golf ball.
The down tube that integrates the fork, ISOFLOW seat stays, internal cable routing, seat tube with Kamm tail aero profile and Triple Edge Technology are just some of the most striking aspects resulting from aerodynamic studies. In addition to these peculiar characteristics that identify Lampo, the high stiffness of the frame enhanced by the integrated oversized seat tube minimizes the energy dissipation.
Lampo Plus Disc
The new Lampo Plus bike combines aerodynamic properties and stiffness with a modern, unique design, in order to meet the needs of cyclists expecting excellent aerodynamic performance.
The essential components of this project are: the new stem, entirely made from carbon as well as specifically designed and optimized to route wires directly from the handlebar to the frame, and the new head tube, devised to ensure an optimal ride quality and a perfect integration of all internal wires.
While it is compatible with all transmission types (mechanical, electronic, hydraulic, wireless), it is only available for disc brake systems compatible with flat mount and thru-axle, 100x12 front and 142x12 rear.
|stiffness value:||120 N/mm|
|head tube:||1”1/8 - 1”½|
|PRESS FIT 86.5 bottom bracket||.|
|internal brake and gear cables guide||.|
|integrated seat clamp||.|
|direct mount brakes||.|
• flat mount disc brakes
• custom made
• BSA-BB30-PF386 bottom bracket
• outer lamination: 1K
• optimization for gear Di2 - EPS
• Wireless or Universal system (mechanical/electronic Di2-EPS)